Product Details

---

The Hale Screen Mounted Pet Doors are pet doors for screen enclosures, doors, and porches. It screws into the bottom corner of the screen frame as opposed to clipping to the screen only, which is common among most dog doors for screens on the market.

If your pet loves to run through the door at full speed, this is the screen pet door for you. With this design, the Hale Pet Door for Screens proves to be stable and reliable, making life more enjoyable for both you and your pet. Everything you need to install the Hale Screen Pet Door is included (no locking cover included with this pet door for screen doors); you just need to provide the screen.

Not the pet door you're looking for? Check out our full selection of pet doors.

Features:

• Sleek, aluminum trim comes in four different colors to match your framing
• Clear, vinyl flap is easy for pets to use and see-through
• Magnets around the flap edges ensure that the flap seals properly. If necessary the magnet strength can be increased
• Fuzzy, nylon weather stripping lines the perimeter of the flap to prevent gaps and bugs from entering
• Available in 11 different sizes to accommodate dogs and cats of all sizes
• 48" wide Stabilizer bar included in the Tall/Large to Giant sizes to ensure frame stability. The installer will trim it to your screen door width. You can add a stabilizer bar kit to a smaller sizes by adding to your order. Custom ordered Stabilizer Bar Kits can be ordered up to 72" wide by contacting Customer Service at (801) 652-9446 or [email protected]

Benefits:

• Corner fit provides more security and lasts longer than other common screen door installations
• Pet doors for screen doors prevent pawing or scratching of your existing screen door
• Lightweight flap allows pets of varying sizes to share a larger-sized door
• It allows you to get more use out of your screen door when the weather is nice
• Sturdiest screen dog door for large dogs on the market
• Three choices for sturdy installation depending on your screen frame design and thickness. Review ORDERING INSTRUCTIONS below for details

 

ORDERING INSTRUCTIONS:

When ordering a Hale Pet Screen Door it is very important that you carefully follow these instructions. You will be contacted for this information after placing your order.

Screen Frame Thickness Options: The Hale pet screen door has various thickness options, which are listed below.  When measuring your screen frame you will need to measure the thickest part.

A. If your screen frame thickness is up to 1/2", but no less than 3/8", you will receive the under 1/2" model which has a 3/4" deep u-shaped flange to hug the bottom and one side of your screen door frame. If the frame is under 3/8" then the framing might not be sturdy enough to support the pet door, so the manufacturer does not recommend this pet door for those instances. 

B. If the frame is over 1/2" and you will have two choices:

Option 1. You can choose the universal model which can work on frames up to 1"

Option 2. For frames over 1" you can choose the custom cut version (used mainly for situations such as screen porches or sidelights) where the Universal model would not work. In this case, Hale will trim off one of the flanges on the channel in order to accommodate very thick framing. The remaining flange is 3/4" long and 3/4" deep. This is considered custom, special order and all returns will only receive a 50% credit.

C. If you do choose the custom cut we will need to know two more pieces of info:

Option 1. Spline on the Interior or Exterior: You will have to choose whether the spline for your screen is located on the interior or the exterior. This is determined by looking at the frame from the inside of your house looking out. Your pet door must be installed on the same side as the screen mesh and spline. The factory will ensure that the framing provided will accommodate that.

Option 2. Pet Door Installs in Which Lower Corner: You will need to specify whether you'll be installing the pet door in the lower left or lower right corner of the screen frame by looking at the frame from the inside of your house.

INSTALLATION INSTRUCTIONS:

Installation instructions -Up to 1/2" and Custom Cut (specific info steps 8 & 9).

Installation instructions - Universal over 1/2" (up to 1"). 

Hale Pet Door Screen Mount Stabilizer Bar Kit: A normal Hale pet screen door is supported down one side and across the bottom by your screen framing. The Screen Mount Stabilizer Bar Kit adds additional support across the top of the pet door. Because extra stability is necessary for the larger flap sizes and more vigorous dogs, the Hale stabilizer is already included for sizes Tall Large up through Giant in the frame color you selected. The size is 48" and you will need to trim it with a hacksaw to fit. All fittings needed are included with the kit. For smaller sizes, you have the option in the drop-down menus to choose to purchase the kit as an add-on. If you just need the stabilizer bar kit, please go to the Stabilizer Bar Kit page.

If you have any questions about whether a Universal vs Custom Cut for over ½" frames will work, please can email us photos to [email protected]. This way, we can take a look and recommend what is best for your situation.